Ultra-thin bezel minimizes the bezel gap in multi-monitor usage, enabling easier. USB upstream port. Connect the USB cable that came with your monitor to the computer. Once this cable is connected, you can use the USB connectors on the monitor. Activate the computer and the monitor to gain access to the OSD. Apr 11, 2009 Hi, Can anybody tell me what the two USB ports on the side of my monitor are for? More Activate Usb Ports On A Monitor videos. If your laptop does not have the 15 pin plug (VGA Port) then you will need to get some type of adapter that will make the monitor work. You probably have a DVI monitor. You just need to make sure you get the correct type of adapter and make sure the ends that plug into the computer are correct such as male or female. For example think of the human male and female body parts when you look at adapters. The vga port on the computer is called a Female port, but the piece that plugs into it is called Male. It's the same with DVI ports. I think you need a VGA Male to a DVI Female so below is a link to one and for $2.54 from Cable Wholesale. Below is a picture of what it looks like. Jun 03, 2012|. If your laptop does not have the 15 pin plug (VGA Port) then you will need to get some type of adapter that will make the monitor work. You probably have a DVI monitor. You just need to make sure you get the correct type of adapter and make sure the ends that plug into the computer are correct such as male or female. For example think of the human male and female body parts when you look at adapters. The vga port on the computer is called a Female port, but the piece that plugs into it is called Male. It's the same with DVI ports. I think you need a VGA Male to a DVI Female so below is a link to one and for $2.54 from Cable Wholesale. Below is a picture of what it looks like. Jun 03, 2012|. Usually the main usb ports for the pc will be on the rear panel of the machine. If you feel safe to do so, switch the machine off and unplug from the power source, remove the side of the machine and touch a piece of bare metal on the chassis to remove any static build up in your body, then have a look around on your mainboard, try to trace the cable from the front usb connections to the mainboard, and see if there is a usb2 version of the socket which they are plugged into, swapping to this may solve your problem. Hope this has been helpful. May 06, 2011|.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2018
Categories |